Quotations are hereby invited for the following: Appointment of a structural expert to conduct fit for purpose testing and assessment of foundation system for Agrément Certification. Specifications: The Pile Foundation System uses a steel pile group connected with a prefabricated steel pile cap to resist vertical (compression and uplift) and lateral loads. The system consists of a steel pile cap of thickness ranging from 4mm to 10mm and steel piles (circular hollow sections) of overall diameter of 42.4mm, and thickness ranging from 2.5mm to 4.0mm. The base plates are drop forged and hot dip galvanized in accordance with SANS 121/ISO 1461. The pile foundation system can be applied to the following occupancy classes A1, A2, A3, A4, A5, B1, B2, B3, C1, C2, D1, D2, D3, D4, E1, E2, E3, E4, F1, F2, F3, G1, H1, H2, H3, H4, H5, J1, J2, J3 as stated in SANS 10400-A. The assessment should be based on applicable standards. The service provider is expected to make recommendations regarding the suitability of the product for Agrément certification. (Tender №97806084)

Country: South Africa
Language: EN
Number: 97806084
Publication date: 15-01-2024
Source:

Description

Full information on the tender is closed.
For further work with the site read the information below.

About us

Leading searching system of world tenders

  • Largest database of tenders and sources of procurement of the World
  • Free daily mailings according to Your settings
  • Winners information
  • Convenient display and downloading of information

Choose us

Getting Started

After site registration, this functions will be available to You

  • Subscription to free mailing list for your keyword phrases
  • Tenders announcements previews
  • Download summary information in Excel format
  • View information about tender winners, suppliers and customers

REGISTER

For using all functions of our site and view full information you need to register a commercial account

  • Selected period
  • Pay access in any of the possible ways

Get full access

Other tenders for this period

Regarding minor works of demolished chambers and drainage lines at various places for maintenance of drainage line under ward 13 of zone 77. Source: Central public Procurement portal India

National Health Laboratory Service invites tenders for the following: Supply and install UPS at various laboratories within Alfred Nzo and Joe Gqabi. Scope: • UPS - Matatiele x 4; • UPS - Taylor Bequest x 4; • UPS - Holy Cross x 2; • UPS - Dr Maliso x 4; • UPS - Mount Ayliff x 4; • UPS - St. Elizabeth x 3; • UPS - Aliwal North x 2; • UPS - Kokstad Office x 3; • UPS - St Patricks. Delivery address: • Taylor Bequest Hospital-Lab NHLS, Main Street, Matatiele; • Taylor Bequest Hospital-Lab NHLS, Mount Fletcher, 4770; • Holy Cross Hospital, Flagstaff, 4810; • Mary Teresa Hospital, Mt. Frere, 5090; • Mt. Ayliff Hospital, Mt. Ayliff, 4735; • St. Elizabeth Hospital, Lusikisiki, 4820; • NHLS Laboratory, Aliwal North Hospital, Park Avenue, Aliwal North; • 47 St. John"s Street, Kokstad, 4700; • St. Patrick"s Hospital, Bizana, 4800. Source: ONLINE TENDERS

The South African Medical Research Council (SAMRC) invite bids from appropriately experienced, qualified, professional, innovative and quality driven service providers with operational offices in Durban for the provision of catering services for their Kwa-Zulu Natal Regional Offices on an ad-hoc basis. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Appointment of a materials expert to conduct fit for purpose testing and assessment of foundation system for Agrément Certification. Specifications: The Pile Foundation System uses a steel pile group connected with a prefabricated steel pile cap to resist vertical (compression and uplift) and lateral loads. The system consists of a steel pile cap of thickness ranging from 4 mm to 10 mm and steel piles (circular hollow sections) of overall diameter of 42.4 mm, and thickness ranging from 2.5 mm to 4.0 mm. The base plates are drop forged and hot dip galvanized in accordance with SANS 121/ISO 1461. The pile foundation system can be applied to the following occupancy classes: A1, A2, A3, A4, A5, B1, B2, B3, C1, C2, D1, D2, D3, D4, E1, E2, E3, E4, F1, F2, F3, G1, H1, H2, H3, H4, H5, J1, J2, J3 as stated in SANS 10400-A. The assessment should be based on applicable standards. The service provider is expected to make recommendations regarding the suitability of the product for Agrément certification. All tests shall either be witnessed by an authorized Agrément South Africa assessor and be conducted by a registered competent person. All test reports must: - Provide the full name, description and intended use of the product; - Provide a technical description of the product; - Detail results of every aspect of the test against the performance requirements; - Be dated and; - Be signed by the test officer and presented in pdf format. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Appointment of a fire expert to conduct a behaviour in relation to fire assessment of a building system for Agrément Certification. Specifications: Superstructures comprise two types of insulated wall panels depending on the application. Wall Type 1 can be used externally and internally. It comprises two skins of chromadek sheets encapsulating a type FR Rockwool core. Wall Type 2 is used as an infill panel and comprises two skins of chromadek sheeting encapsulating an Expanded polystyrene core (EPS). These walls are type N and thus the total elevation area shall be constructed as a window or opening and the safety distances shall be applied. Foundations (sub-structures) are either conventional concrete rafts with thickened edge beams, light gauge steel chassis or suspended steel chassis. Foundations, including floors, are always a responsibility of a registered professional, competent engineer. Roofs are Standing Seam (SSR) panels and comprise two skins of chromadek sheeting encapsulating expanded polystyrene (EPS) core. Windows and doors are standard aluminum and are installed on site. Plumbing and electrical conduits are surface mounted or inside the panels. Source: ONLINE TENDERS

Gauteng CET College is hereby inviting service providers to quote on the following: Supply and delivery of student card machine printer for Wattville CLC. Specifications: - Print mode: Colour dye; - Print speed - double-sided; - Card security: watermark be printed across the card surface; - Card capacity: Input hopper - up to 125 cards (up to 200); - Output hopper - up to 25 cards (up to 100 optional); - Warranty: 2 years; - Printer interfaces: High Speed USB 2.0, USB 3.0 compatible - Type B, 10/100 Ethernet; - Driver compatibility: Win 11 / Win 10, 2004 and above, both 32 / 64 bit; - Windows Server 2022 / 2019 / 2016 / 2012 R2, 64 bit; - MacOS latest version; - Linux with CUPS support; - Dye film: Half panel, double-sided dye film, prints colour on one side, black on reverse with overcoat panel 250 images; - Card types/thickness: Blank white cards with magnetic stripe; - Cleaning supplies: cleaning kit - 10 cleaning cards, 1 pen; - Software for a maximum of 400 000 students can be included; - Qty: 02. Source: ONLINE TENDERS