Main Page Tenders by countries South Africa: Tenders

Quotations are hereby invited for the following: Repairs to A charger long travel wheels and wheel mountings. Scope: Repairs to A charger long travel wheels: - Collect wheel from Shop 17; - Strip out all bearings; - Inspect the bearing journals and the shaft, if any damages perform all necessary welding repairs on the shaft; - Repairs to bearing hub on the wheel; - Repair all bearing blocks x 6; - Machine the wheel to remove the bearings and to make the outer diameter even; - Repair the wheel by rolling and fit a strip if forged E24 steel to make up for the worn out material (basically fitting a steel tire made of E24 steel to ensure the wheels are restored to original dimensions); - Reassemble the wheels, paint and deliver to Shop 17; - Contractor to strip the wheels complete with the axle, clean out the area to allow for safe working conditions; - A complete repaired set of wheels consist of 2 x wheels, 4 x bearings, 2 x axle boxes and 1 x shaft); - Supplier to provide own tool such as jacks, hydraulic power packs and spanners. Location of Service: PE MPT. Please confirm the closing time as two closing times were published. (Tender №91510888)

PUSH for registration

Share:
Country: South Africa
Language: EN
Number: 91510888
Publication date: 03-10-2023
Source:

Description

Full information on the tender is closed.
For further work with the site read the information below.

About us

Leading searching system of world tenders

  • Largest database of tenders and sources of procurement of the World
  • Free daily mailings according to Your settings
  • Winners information
  • Convenient display and downloading of information

Choose us

Getting Started

After site registration, this functions will be available to You

  • Subscription to free mailing list for your keyword phrases
  • Tenders announcements previews
  • Download summary information in Excel format
  • View information about tender winners, suppliers and customers

REGISTER

For using all functions of our site and view full information you need to register a commercial account

  • Selected period
  • Pay access in any of the possible ways

Get full access

Other tenders for this period

Quotations are hereby invited for the following: Pressure cleaning of stacking conveyors. Scope of Works: Cleaning of 2AB, 3AB, 4AB and A, B stackers: - Supplier to clean and remove all water, sludge and ore under the conveyor belts and counter weights and pump pits; - Contactor is required to clean the counter weight and counter weight pits completely free of all the ore and sludge; - The sludge should be taken out and dumped on the scrap ore damping side Transnet will provide the dumping site; - Supplier will be responsible for pumping any water out of the pits; - If the plant is running supplier will be required to use any means possible and necessary to get the sludge out of the pits on to the top surface; - After cleaning is done supplier is required to high-pressure clean the floors of the pits and wash down or sludge from the counter weight structure; - Supplier will be requested to work as and when it is required based on the plant availability; - Cleaners might be requested to work over night depending on the plant needs. Location of Service: PE Habour. Source: ONLINE TENDERS

Tenders are hereby invited for the following: Hydraulic diverter/chute service 9s onto 10s. Scope: - Strip and remove chute hydraulic actuator for service (this can be done during 10 days shut, make sure that all good electrical cable are preserved for use during re-installation); - Service both hydraulic power packs (standard hydraulic service); - Install newly serviced hydraulic cylinder (note supplier to supply all required tools needed to complete the job); - Make sure that all electrical component are properly installed; - Replace damaged hydraulic piping were necessary (TPT to approve); - Commission hydraulic cylinder. Location of Service: PE Habour. Source: ONLINE TENDERS

Tenders are hereby invited for the following: Hydraulic diverter/chute service 8s onto 9s. Scope: - Strip and remove chute hydraulic actuator for service (this can be done during 10 days shut, make sure that all good electrical cable are preserved for use during re-installation); - Service both hydraulic power packs (standard hydraulic service); - Install newly serviced hydraulic cylinder (note supplier to supply all required tools needed to complete the job); - Make sure that all electrical component are properly installed; - Replace damaged hydraulic piping were necessary (TPT to approve); - Commission hydraulic cylinder. Location of Service: PE Habour. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Supply of generator, AC, 23309926, Volvo, ALT. Specifications: Generator: Alternating Current, Type: Alternator, P/N: 23309926, Volvo x 04 each. Delivery Date: 31/10/2023. Location: Cape Town. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Service and repairing belt scales at 7A, 7B, 8A and 8B belts and A, B, C reclaimers for Transnet Soc Ltd Operating as Transnet Port Terminals for Port Elizabeth Bulk Terminal. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Supply of rechargeable light head. Scope: Light, Head; Type: Rechargeable, Lens Color: Clear, Lamp Type: Light Emitting Diode, 1180 Lumens, Lamp Quantity: 1, Special Feature S: Ipx-6 Waterproof; Complete With Sst40 N4 Bc Led, Battery, Head Band, O Ring and USB Cable. Jetbeam Hr 25 Head Lamp - Equal or Similar Specs will be accepted. Qty: 20. Source: ONLINE TENDERS