Quotations are hereby invited for the following: Strip, repair, reassembly & test hub. Scope of work: 1. Replace all old studs, washers, and nuts (Back nut and wheel nuts); 2. Clean and Inspect gears and shaft gear for wear; 3. Clean shaft and inspect gear and spines; 4. Replace item no. 53 and 54 (Bearings); 5. Replace item no. 55 and 121 (Bushing); 6. Replace item no. 50 and 51 (Ring seal); 7. Replace item no. 303 (0 Ring); 8. Clean and repair holes on item no. 42 (Hub), Fill and rebuild holes with internal splines to accommodate tight stud"s fitment; 9. Clean and inspect gears on item no.302 (Piece, transition); 10. Fill and rebuild holes into correct size on item no. 302 (Piece, transition), that will accommodate tight stud"s fitment; 11. Remove broken inside pieces of item no. 313 (screws, hexagon) on Hub; 12. Replace item no.313 (screws, hexagon) x12; 13. Replace item no.68 (screws, hexagon) x12; 14. Assemble the unit up to item no.40 (Shaft vehicle); 15. Check if shaft is turning freely after fitment is completed; 16. Top up gear oil to keep gears and bearings lubricated; 17. Note: No grease to be used on this unit, it is oily lubricated. (Tender №103258300)

PUSH for registration

Country:

South Africa

Language: EN
Number: 103258300
Publication date: 22-04-2024
Source: ONLINE TENDERS

Description

Full information on the tender is closed.
For further work with the site read the information below.

About us

Leading searching system of world tenders

Largest database of tenders and sources of procurement of the World
Free daily mailings according to Your settings
Winners information
Convenient display and downloading of information

Choose us

Getting Started

After site registration, this functions will be available to You

Subscription to free mailing list for your keyword phrases
Tenders announcements previews
Download summary information in Excel format
View information about tender winners, suppliers and customers

For using all functions of our site and view full information you need to register a commercial account

Selected period
Pay access in any of the possible ways

Get full access

Other tenders for this period

Modimolle-Mookgophong Local Municipality hereby invites experienced and suitable tenderers to express their interest in the following: Appointment of consultants in transactional advisory services. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Replacement of ZPMC TLS sheaves/Remove and replace TLS sheave 528. Scope: - Remove and replace TLS sheave 528 x 2. Please confirm the contract number as two were published. Source: ONLINE TENDERS

Modimolle-Mookgophong Local Municipality hereby invites experienced and suitable tenderers for the following: Refurbishment of Modimolle Offices (Ground Floor and First Floor), Once off. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Servicing of Autoclave, NHLS Histology Tygerberg – Cape Town – WC. Scope: 1. Servicing of laboratory equipment: - 1 x Servicing of Autoclave serial number 7410-4072.A1G.004497.A. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Strip, repair, reassembly & test hub. Scope of work: 1. Replace all old studs, washers, and nuts (Back nut and wheel nuts); 2. Clean and Inspect gears and shaft gear for wear; 3. Clean shaft and inspect gear and spines; 4. Replace item no. 53 and 54 (Bearings); 5. Replace item no. 55 and 121 (Bushing); 6. Replace item no. 50 and 51 (Ring seal); 7. Replace item no. 303 (0 Ring); 8. Clean and repair holes on item no. 42 (Hub), Fill and rebuild holes with internal splines to accommodate tight stud"s fitment; 9. Clean and inspect gears on item no.302 (Piece, transition); 10. Fill and rebuild holes into correct size on item no. 302 (Piece, transition), that will accommodate tight stud"s fitment; 11. Remove broken inside pieces of item no. 313 (screws, hexagon) on Hub; 12. Replace item no.313 (screws, hexagon) x12; 13. Replace item no.68 (screws, hexagon) x12; 14. Assemble the unit up to item no.40 (Shaft vehicle); 15. Check if shaft is turning freely after fitment is completed; 16. Top up gear oil to keep gears and bearings lubricated; 17. Note: No grease to be used on this unit, it is oily lubricated. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Strip, repair, reassembly & test hub. Scope of work: 1. Replace all old studs, washers, and nuts (Back nut and wheel nuts); 2. Clean and Inspect gears and shaft gear for wear; 3. Clean shaft and inspect gear and spines; 4. Replace item no. 53 and 54 (Bearings); 5. Replace item no. 55 and 121 (Bushing); 6. Replace item no. 50 and 51 (Ring seal); 7. Replace item no. 303 (0 Ring); 8. Clean and repair holes on item no. 42 (Hub), Fill and rebuild holes with internal splines to accommodate tight stud"s fitment; 9. Clean and inspect gears on item no.302 (Piece, transition); 10. Fill and rebuild holes into correct size on item no. 302 (Piece, transition), that will accommodate tight stud"s fitment; 11. Remove broken inside pieces of item no. 313 (screws, hexagon) on Hub; 12. Replace item no.313 (screws, hexagon) x12; 13. Replace item no.68 (screws, hexagon) x12; 14. Assemble the unit up to item no.40 (Shaft vehicle); 15. Check if shaft is turning freely after fitment is completed; 16. Top up gear oil to keep gears and bearings lubricated; 17. Note: No grease to be used on this unit, it is oily lubricated. Source: ONLINE TENDERS